There is a red flashing light on the Pebble or the Base

There is a red flashing light on the Pebble or the Base

Looks like we are low on juice🔋


A red light flashing on either end of the Pebble or Base
indicates that the device is low on battery and will not turn on.

  • If the Base is flashing red, plug it into the power source.

  • If the Pebble is flashing red, connect the Pebble to the Base using the USB cable.

Smart Nora can still function while charging. During normal use keep the Base plugged into the wall and the Pebble connected to the Base with the USB cable.

    • Related Articles

    • There is a blue light flashing on the Pebble

      Looks like the bluetooth connection between the Pebble and Base is broken. To reestablish the connection, follow these steps: Make sure your cellphone or any other Bluetooth enabled devices are away from the Pebble and Base. 1. Turn the Base and ...

    • Should I turn OFF the Base Unit at any time?

      We recommend always leaving your Base Unit on AND plugged in as it only has a 24 hour charge unplugged. Turning the Base Unit off can interrupt the Bluetooth connection and cause your Pebble to flash blue. Rest assured that leaving the Base Unit on ...

    • Charging your Smart Nora unit

      Upon first receiving your Smart Nora (or when you see the red light on the Base or Pebble), please make sure both are fully charged before using. The green light will flash to indicate charging is taking place and will stop when each piece is fully ...

    • How do I set up Smart Nora?

      Pro-tips 1. Use the 30-minute Delayed Start Smart Nora will wait 30 minutes before activating so you can fall asleep first. Press and hold ON button for 3 seconds to activate the delayed start mode. Learn More 2. Adjust the Snore detection ...

    • User Manual

      You can find our User manual here.