There is a blue light flashing on the Pebble

There is a blue light flashing on the Pebble

Looks like the bluetooth connection between the Pebble and Base is broken.


To reestablish the connection, follow these steps:

Make sure your cellphone or any other Bluetooth enabled devices are away from the Pebble and Base.

1. Turn the Base and Pebble OFF
Make sure the Base and Pebble are not connected with the USB cable and then turn both
of them OFF.


2. Lock the Pebble
On the back of the Pebble using the lock switch, “lock” the Pebble.


3. Turn ON the Base, and connect USB Cable to the Pebble


4. Unlock the Pebble and keep the Pebble OFF. All LED lights should be off.


5. On the Pebble press and hold the Bluetooth Button for 3 seconds. Purple light will flash.

When the purple light stops flashing, turn the Pebble ON, the LED should show a solid white light. Nora is now ready.

If the purple light keeps flashing for more than 10 seconds, make sure there is proper connection with USB cable on Pebble and Base. Make sure the Base is ON and you see the solid white light.

If this does not solve your issue, please proceed to reset your Smart Nora.


    • Related Articles

    • There is a red flashing light on the Pebble or the Base

      Looks like we are low on juice? A red light flashing on either end of the Pebble or Base indicates that the device is low on battery and will not turn on. If the Base is flashing red, plug it into the power source. If the Pebble is flashing red, ...

    • How do I set up Smart Nora?

      Pro-tips 1. Use the 30-minute Delayed Start Smart Nora will wait 30 minutes before activating so you can fall asleep first. Press and hold ON button for 3 seconds to activate the delayed start mode. Learn More 2. Adjust the Snore detection ...

    • Should I turn OFF the Base Unit at any time?

      We recommend always leaving your Base Unit on AND plugged in as it only has a 24 hour charge unplugged. Turning the Base Unit off can interrupt the Bluetooth connection and cause your Pebble to flash blue. Rest assured that leaving the Base Unit on ...

    • How Do I set Up my Nora Gen 2?

      To learn more about the mobile Companion App and our road map go here 1. Connect Air Tube Connect the Air Tube from the Pillow Insert into the Base. 2. Connect Base Charger Place Base Plug into Base Charger. Connect Base Charger into Base. Plug the ...

    • User Manual

      You can find our User manual here.